To start, I'm going to cut straight to the part that most of you want to know. This information is based on calculations I have done personally based on typical Mastercool DOT tanks, but feel free to come to your own conclusions based on your own calculations. I prefer to stay on the safe […]

This quick article was written by market refrigeration tech Clayton Peeples. Thanks, Clayton! Adjusting the TXV should be done last after checking all other causes of the case being warm or floodback on the rack. TXVs very rarely go bad; generally, it's a dirty screen or a failed powerhead, both of which can be addressed […]

In these tips and on the podcast, we talk a lot about the importance of deep vacuum, and deep vacuum using proper processes and tools is the best. It's really the ONLY way to ensure that a system is clean, dry, and tight. Just for review, that means: Nitrogen purge, flow and pressurize > Cores […]