Sometimes, we can focus on the more complicated aspects of a system and parts installation—like evacuation and flowing nitrogen—and forget the simple and critical common-sense steps to keep contaminants out of the system. One of these is pre-cleaning the tubing and connection before cutting or unsweating. For example: If you are replacing a coil, use […]

There is a lot of misunderstanding about the HSO (hard shut-off) or “non-bleed” TXV (thermostat expansion valve) and what makes it shut off, why it exists, and how it “magically” opens. Once you understand the forces inside the valve, it is quite simple, obvious, and sadly devoid of any magic. The Three Forces  The TXV […]

This article was written by Regan Murphy. Thanks, Regan! Disclaimer: Any percentages used are the opinion of the author and not based on any actual facts. You are probably already used to getting the model and serial numbers of the equipment. You may have even made a habit of getting the part number, but there […]