We've seen it before. A tech diagnoses a failed blower relay or board. They leave the blower jumped out by putting a terminal multiplier on the common terminal of the relay/board and connecting the fan speed tap right to power. There can be an issue with that. Some electric heat fan coils have a heat/blower […]

This article was written by Sam Myers with Retrotec. Thanks, Sam! If you’ve ever lived in a historic home, you’ve likely noticed that the level of comfort can change throughout different parts of the house. It can also typically change throughout different times of the year, depending on your climate. That is primarily due to […]

Friction rate is a value located on a ductulator. We use it during the design phase of a duct system to predict the operating static pressure of a duct system. The challenge with friction rate is that it is often misapplied by folks using a rule of thumb (ROT). In order to apply friction rate properly, […]