With cold temperatures right around the corner, it is a good time to brush up on our steam now, and there's no better way to do that than by reading an article by Dan Holohan. This article was written by Dan Holohan and published at HeatingHelp.com HERE. It has been reposted here with permission. This […]

Here's the first question: Does it really matter if the speed taps on a motor are run or common? Well, yes… sort of. In some cases, it helps to identify if you're dealing with an open winding or an open thermal overload. The thermal overload breaks common, but you will still read a path between […]

When evacuating, the FASTEST way is to use two large-diameter hoses connected to two core removal tools and the cores removed. These hoses are then connected to the pump using a tee or evacuation “tree.” However, when you only have one large hose, another acceptable method is to connect the large hose to the suction […]