Technicians have to make flare fittings in the field every day. Most of the time, the application is for mini-split/ductless installs. However, you may encounter certain situations where flared fittings are more practical than a braze joint. Regardless of the reason, flared connections are notorious in our trade for being popular leak areas. Either the flare […]

When mounting a TXV bulb or checking bulb placement, there are a few important considerations (listed in order of importance): Mount the bulb on the suction line. Flapping in the breeze is no good. Mount it TIGHTLY with a proper metallic strap (usually copper, brass, or stainless steel)—not with zip ties or tape. Position it on […]

When you ask many people nowadays how to check the charge on a heat pump during low outdoor temps, they will say that you need to “weigh in and weigh out” the charge. While this may be an effective method, it isn't always practical. Now, if you are making a refrigerant circuit repair, weighing out […]