As HVAC/R techs, we don't generally do a lot of soldering—unless you are in a shop that has embraced Stay Brite® 8 from Harris. Several aluminum repair products on the market also use an indirect soldering type technique, so this is a general and generic overview of some best practices. As always, follow the manufacturer's […]

The piston (fixed orifice) and TXV (thermostatic expansion valve) are the two most common metering devices in use today, though some modern systems utilize an electronically-controlled metering device called an EEV (electronic expansion valve). It should be noted that there are other types of fixed-orifice metering devices, like capillary tubes; however, their use is not […]

This article is primarily based on HVAC School’s “Drain Cleaning – More To It Than We Think,” hosted by Bryan Orr and featuring Corey Cruz and Mike Klokus. You can listen to that episode HERE. How hard could it be to clean a drain? The slime should just wash away if you flush the drain […]