When we say that there is “flash gas” at a particular point in the system, it can either be a bad thing or a good thing, depending on where it is occurring. Flash gas is just another term for boiling. It is perfectly normal (and required) that refrigerant “flashes” or begins boiling directly after the […]

This quick article was written by market refrigeration tech Clayton Peeples. Thanks, Clayton! Adjusting the TXV should be done last after checking all other causes of the case being warm or floodback on the rack. TXVs very rarely go bad; generally, it's a dirty screen or a failed powerhead, both of which can be addressed […]

When you walk up to a piece of equipment, you want to follow a process to ensure that you accomplish five things: #1 – You diagnose the fault correctly. #2 – If possible, you find the “why” of the failure. #3 – Find any other problems or potential problems with the system that can cause […]