Everyone in the HVAC/R trade uses some type of torch to braze or solder alloys together. So, what is the proper way to handle an oxyacetylene torch? It turns out that there’s more than one right answer. Depending on which torch rig you use, the manufacturer’s manuals for operation may vary.  Everyone (hopefully) knows […]

This article was inspired by an email we received from a viewer of our HVAC School YouTube channel, Jim Holbrook. Thank you, Jim! Disclaimer: This article is written to help educate you and hopefully save lives. We are NOT an authority on the topic. OSHA, as well as company best practices and risk assessments, should […]

Courtesy of Emerson It is important to have refrigerant free from debris and contaminants, and we control these issues on many different fronts. 1. Proper tubing handling prevents copper shavings, dirt, and water from entering while installing. 2. Flowing nitrogen while brazing prevents carbon build-up. 3. Deep vacuum of 500 microns or less removes air, […]