Courtesy of Emerson It is important to have refrigerant that is free from debris and contaminants, and we control these issues on many different fronts. 1. Proper tubing handling preventing copper shavings, dirt, and water from entering while installing. 2. Flowing nitrogen while brazing to prevent carbon build-up. 3. Deep vacuum of 500 microns or […]

In a previous article, we covered the standard way to check capacitors under load. I am now going to give you an even easier test. A properly functioning PSC (permanent split capacitor) or CSCR (capacitor start capacitor run) motor should have a power factor of very close to 1 if they have a properly sized […]

I was talking about dry contacts with one of my techs, and he looked at me like I had three heads—and one of them was on fire. So, I figured it would be good to cover the difference between wet and dry contacts in a tech tip. Basically, “dry” contacts are switches with no shared […]