When tightening down a blower wheel or a fan blade on a motor shaft, ONLY tighten it on the flat of the shaft. If you have more than one screw but only one flat surface on the shaft, only tighten the one set screw. Also… Refrain from over-tightening set screws; they need to bite into […]

Now is the part where we get specific about start capacitors and inrush. If you haven't read the first three parts, please do so before reading this one, or it may not make sense. (You can find Part #1, Part #2, and Part #3 at these links.) I'm going to come out and say it […]

I know I'm gonna get some eye-rolling here, but it needs to be said. When we teach electricity to new techs, we use a lot of “water” metaphors. We talk about volts like PSI, amps like flow, and watts like GPM (speaking of GPM in HVAC, check out our article on hydronics HERE). Even the […]